SFLC Series Commercial Reverse Osmosis System 1,700 to 3,400 gallons per day
- Flow rates designed on temperatures of 25°C or 77°F
- Painted Carbon free standing Reverse Osmosis frame
- Stainless steel high pressure booster pump
- 1” NPT Big Blue high pressure prefilter housing with
500 psi burst pressure, pressure release, 125 psi maximum operating pressure, 20” long. - 4 ½ “ x 20 “ 5 micron polypropylene replacement cartridge filter
- 1” Burkert solenoid valve
- 0 – 150 psi 4” stainless steel oil filled pressure gauge
for post filter pressure - 0 – 300 psi 4” stainless steel oil filled pressure gauge
for Reverse Osmosis thin film composite membranes. - Flow controls: Product, Waste and Recycle
- Waste water recycle reduces waste water cost by
up to 80 percent. - Stainless steel 4” x 40” Reverse Osmosis membrane housings c/w Noryl end cap.
- 4” x 40” low energy thin film composite
Reverse Osmosis membranes. - John Guest high pressure tubing and fittings
- Microprocessor Controller provides standard functions of the controller are monitoring or control of:
- Reverse Osmosis high pressure pump motor
- Inlet solenoid valve
- Automatic flush solenoid valve
- Low feed pressure switch
- High pressure pump switch
- Reverse Osmosis storage tank level switches
- Product water TDS/Conductivity Meter
- Water Temperature
- Pretreatment lockout
- Operating hours
- Reverse Osmosis tank full override
- 120/240 vac 15 + 10% 50/60 Hz 25 watts
- Operating temperature 40°F to 120°F
- Enclosure 8” x 6” x 4” (203mm x 152mm x 102mm)
Nema 4x
SFC Series Commercial Reverse Osmosis System 1,700 to 10,200 gallons per day
- Flow rates designed on temperatures of 25°C or 77°F
- Stainless steel free standing Reverse Osmosis frame
- Stainless steel high pressure booster pump
- 1” NPT Big Blue high pressure prefilter housing with
500 psi burst pressure, pressure release, 125 psi
maximum operating pressure, 20” long. - 4 ½ “ x 20 “ 5 micron polypropylene replacement cartridge filter
- 1” Burkert solenoid valve
- 0 – 150 psi 4” stainless steel oil filled pressure gauge
for post filter pressure - 0 – 300 psi 4” stainless steel oil filled pressure gauge
for Reverse Osmosis thin film composite membranes. - Flow controls: Product, Waste and Recycle
- Waste water recycle reduces waste water cost by
up to 80 percent. - Stainless steel 4” x 40” Reverse Osmosis membrane housings
c/w Noryl end cap. - 4” x 40” low energy thin film composite
Reverse Osmosis membranes. - John Guest high pressure tubing and fittings
- Microprocessor Controller provides standard functions of the controller are monitoring or control of:
- Reverse Osmosis high pressure pump motor
- Inlet solenoid valve
- Automatic flush solenoid valve
- Low feed pressure switch
- High pressure pump switch
- Reverse Osmosis storage tank level switches
- Product water TDS/Conductivity Meter
- Water Temperature
- Pretreatment lockout
- Operating hours
- Reverse Osmosis tank full override
- 120/240 vac 15 + 10% 50/60 Hz 25 watts
- Operating temperature 40°F to 120°F
- Enclosure 8” x 6” x 4” (203mm x 152mm x 102mm)
Nema 4x
Series SFLI Commercial Reverse Osmosis System
- Flow rates designed on temperatures of 25°C or 77°F
- Steel epoxy painted frame is standard (stainless steel frame is optional)
- 1” NPT Burkert Inlet Solenoid Valve
- 1” NPT high pressure prefilter housing c/w pressure release 500 PSI burst pressure, 125 PSI maximum operating pressure, 20” long
- 4 1/2” x 20” 5 micron polypropylene prefilter replacement cartridge
- stainless steel high pressure booster pump c/w TEFC motor
- Low pressure pretreatment plumbed in PUC pipe and fittings
- High pressure tubing with stainless steel fittings from booster pump through membrane system
- Flow meters measuring product water, recirculation and waste
- Stainless steel oil filled pressure manual control valve to increase and decrease pump pressure waste water and recirculation for up to 80 percent waste water reduction controlled by recirculation flow meter
- Low pressure feed water pressure switch
- High pressure feed water pressure switch
- Stainless steel membrane housings with end caps
- 4” by 40” low energy high quality thin film composite reverse osmosis membranes
- MICROPROCESSOR CONTROLLER STANDARD FEATURES:
- Multifunction key pad
- Display backlit LCD (4 lines / 20 character)
- Visual and Audible alarms
- Monitoring via PC
- Programmable time delays and setpoints
- All readings are field programmable for metric and US valves
- Write protected setpoints
- High/low pressure automotive reset alarm silence
- Non metallic Nema 4x enclosure
- 12” x 10” x 6” (305mm x 254mm x 152mm)
- Panel mount
Series SFIN Commercial Reverse Osmosis System
- Flow rates designed on temperatures of 25°C or 77°F
- Polyurethane coated steel or stainless steel frame
- Stainless steel high pressure Booster Pump with TEFC Motor
- Stainless steel prefilter housing with a maximum operating
pressure of 150psi - 5 Micron prefilter pleated cartridges
- 2” 3 Way Control Valve with 1/8 inch Solenoid for inlet and automatic flush
- Pressure Gauges Stainless steel oil filled
Prefilter 0 – 100 psi Post Filter 0 – 100psi
Product 0 – 100 psi Pump 0 – 600psi
Waste 0 – 600psi Module 0 – 600psi - Flow Controls for product, waste and recycle.
- Waste recycle reduces waste water cost by up to 80 percent
- Low feed pressure switch
- High pump pressure switch
- Reverse Osmosis tank level switches
- Product water TDS/conductivity meter
- Reverse Osmosis tank full override
- Operating temperature of 22°F to 140°F
- 8”x40” fiberglass filament wound or stainless steel membrane
housing with/end caps - 8”x40” low energy thin film composite membranes
- All plumbing will be high pressure Sch80 PVC pipe and fittings
- MICROPROCESSOR CONTROLLER STANDARD FEATURES:
- Universal AC Power 80 – 265 Vac 50/60 HZ
- 4 Lines x 40 Character backlit liquid crystal display
- 18 Key keypad with integral alarm light
- Programmable time delays and set points
- Real time clock with battery backup
- Non- volatile set point memory
- Audible alarm with timed alarm silence
- US or Metric readings
- Nema 4X hinged enclosure, 16”x14”x8”, larger panel required
- Plug in terminal strips
- Led input/output indicators
- Pre-programmed R.O. functions
- MICROPROCESSOR CONTROLS AND MONITORS THE FOLLOWING:
- Feedwater valve relay
- Reverse Osmosis and Auxiliary pump control relays
- Permeate and feed TDS/Conductivity membrane flush valve relay
- Permeate divert valve relay temperature
- Operating hours
- Low feed pressure switch
- High pump pressure switch
- Pretreatment lockout
- Flow meter interface for permeate and concentrate
- Reverse Osmosis tank switches
- Reverse Osmosis tank low switch
- Remote alarm output
- RS232 serial port output
- OPTIONS:
- pH sensors with display and alarms set points
- IEC motor starters and control transformers flow sensors to display
flow in GPM or LPM with percent recovery displayed and alarm set
points for high and low flow rates - Pressure sensors allowing display on LCD of pressures and differential pressures with programmable set points for high, low with differential pressure alarms
- Graphic display